make your own OEM riser card
With our innovative know how & price modification we offer the most conveninet servise for customised riser card,
when you give us the following information:
- main board model Nr.
-
- chassis height 1U/2U/3U
- how long should the cable be,(up to 3 inches in unit price included)
- MOQ: 100 pieces
- lead time:4 weeks
Riser Card in all kinds of system intergration
We offer devise bus extenders, flexible extenders and various riser cards, including the right angle and multi slot riser cards.
Till now we work with the leading engineers & manufacturer of high quality bus extenders. Our products basically fall into 3 categories;
- Bus Isolation Extender
- Straight Extender
- Right Angle Extender
The uniquely designed Bus Isolation Extenders are innovative tools for developing and testing of PC add-on boards.
They allow the board under test to be added and removed from the system bus, without having to power down the entire system.
They offer tremendous time and labor savings during product development and production testing.
Right angle risers for PCI Express in 1U solution
SXP16-R1 Seires are the right angle risers for the PCI Express X1, X4, X8 and X16 buses.
The connector is soldered on the component side (B side) of the board.
When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard..
All these risers have the same height, at 1.22". The connector center height is 1.05", and the widths are 1.72",
2.27", 2.94", 4.24" respectively.
Right angle risers for PCI Express in 2U solution
SXP16-R2 series are the right angle risers for the PCI Express X1, X4, X8 and X16 buses.
The connector is soldered on the component side (B side) of the board. When an I/O board is inserted,
the component side of the I/O board will face down, towards the motherboard..
All this kind of risers have the same height, at 2.02".
They are designed to line up with the middle panel cutout of a 2U chassis.
The connector center height is 1.85", and the widths are 1.72", 2.27", 2.94", 4.24" respectively.
Right angle risers for PCI Express in three cut 2U solution
SXP16-R3 series are the right angle risers for the PCI Express X1, X4, X8 and X16 buses.
The connector is soldered on the component side (B side) of the board. When an I/O board is inserted,
the component side of the I/O board will face down, towards the motherboard..
All these risers have the same height, at 2.82".
They are designed to line up with the top panel cutout of a three cut 2U chassis.
The connector center height is 2.65", and the widths are 1.72", 2.27", 2.94", 4.24" respectively.
